Laserfiche WebLink
❑ Use wire nuts to join the wires, color for color, together. There may be some extra wires in <br /> some sealed nipples, cap these off and dress aside. <br /> ❑ Keep wires clear of pinch points and from interference, make sure no wires overhang the <br /> door openings. <br /> ❑ Replace the cover on the junction box. <br /> 12. WIRING INSIDE THE ELECTRONICS COMPARTMENT: (See Photos Q, R, S, & T) <br /> F <br /> t <br /> Photo Q Photo R <br /> ❑ In the electronics bay, locate the light assembly on the upper right side of the cabinet, <br /> see photo Q. In photo R, notice the 3/16" hole that must be made to accept the module <br /> mounting screw. Punch this hole approximately as shown. If drilling, be sure no hazardous <br /> vapors are present and use a coffee cup or other suitable container to prevent metal chips <br /> from falling inside the cabinet. <br /> 8-12 <br /> CARB Approved IBM 8-Wayne Harmony Series(Assist)-Executive Orders VR-281 and VR-282 <br />