COMPLIANCE INFO - Laserfiche WebLink

Home Browse Search

JSA 22: OPERATION AND MAINTENANCE (REMEDIATION SYSTEMS) March 30, 2010 - Field staff must review job-specific work plan and coordinate with project manager to verify that all up-front logistics are completed prior to starting work including, but not limited to, permitting, access agreements, and notification to required contacts (e.g. site managers, inspectors, clients, subcontractors, etc.). A tailgate safety meeting must be performed and documented at the beginning of each workday. Weather conditions (heat, cold, rain, lightning) must also be considered. 0 Job Steps 0 Personal Protective Equipment 0 Potential Hazard 0 Critical Actions/Precautions Lifting hazard. Electrical hazard. Use proper lifting techniques. Gauge water levels and product thickness (where applicable), Wear reflective vest for traffic, steel toed and shank shoes, hardhat, safety glasses with side shields, and leather gloves as necessary. Wear chemical resistant suit as needed. Wear appropriate chemical resistant gloves as needed. Wear appropriate air purifying respirator with combination organic vapor/P-100 cartridges as needed. Wear appropriate hearing protection as needed. Back strain. Inhalation or dermal exposure to chemical hazards. Repetitive motion. Traffic hazards. Maintain safe distance from the wellhead. Employ safe lifting procedures. Initiate air monitoring as outlined in the site-specific Health and Safety Plan, as necessary. Have appropriate air purifying respirator with combination organic vapor/P-100 cartridges within 3-5 feet of work area, readily available. Decontaminate equipment between each measurement. Decontamination will be accomplished by an Alconox wash, rinsed with tap water, and then rinsed with a distilled or de-ionized water rinse. Commence remedial system monitoring (where applicable), Wear reflective vest for traffic, steel toed and shank shoes, hardhat, safety glasses with side shields, and leather gloves as necessary. Wear chemical resistant suit as needed. Wear appropriate chemical resistant gloves. Wear appropriate air purifying respirator with combination organic vapor/P-100 cartridges as needed. Wear appropriate hearing protection as needed. Explosion or fire. Trip hazards. Unauthorized release of contaminants. Exposure to contaminants (inhalation, dermal contact). Noise. Electrical hazards. Follow equipment-specific operation instructions. Monitor treatment system vapor and oxygen concentrations if applicable. Perform air monitoring as outlined in the site-specific Health and Safety Plan, as necessary. Have appropriate air purifying respirator combination organic vapor/P- 100 cartridges within 3 - 5 feet of work area, readily available. Keep work area clean, minimizing slip, trip and fall hazards. Monitor treatment system and collect data to ensure discharge is within permit parameters and capacity of any storage containers (concentrations and flow rates). Collect samples in accordance with sampling plan, (where applicable), Wear reflective vest for traffic, steel toed and shank shoes, hardhat, safety glasses with side shields, and leather gloves as necessary. Wear chemical resistant suit as needed. Wear appropriate chemical resistant gloves. Wear appropriate air purifying respirator with combination organic vapor/P-100 cartridges as needed. Wear appropriate hearing protection as needed. Cross-contamination. Improper sample labeling or storage. Exposure to site contaminants. Repetitive motion. Back Strain. Label samples in accordance with sampling plan. Keep samples stored in proper containers, at correct temperature, and away from work area. Minimize splashing when collecting water samples. Perform air monitoring as outlined in the site-specific Health and Safety Plan, as necessary. Have appropriate air purifying respirator with combination organic vapor/P-100 cartridges within 3-5 feet of work area, readily available. Decontaminate sampling equipment after collecting each sample. Decontamination will be accomplished by an Alconox wash with tap Paper copies are uncontrolled and are valid only at the time of printing. The electronic version may be downloaded from SG1's intranet. Page 2 of 4 The Source Group, Inc.