COMPLIANCE INFO_FINAL WMU FU-23 DESIGN RPT & CONCURRENCE LTRS

Home Browse Search

Forward Landfill WMU FU-23 02778 5 HDPE GEOMEMBRANE B. Delivery. 1. Deliver materials to the site only after the QA/QC CONSULTANT accepts required submittals. 2. Separate damaged rolls from undamaged rolls and store at locations designated by the OWNER until proper disposition of material is determined by OWNER. 3. QA/QC CONSULTANT will determine damage. 4. Deliver in rolls, do not fold. C. Storage on Site: 1. Store geomembrane rolls in the space allocated by the OWNER. 2. Store geomembrane rolls to protect from puncture, dirt, grease, water, moisture, mud, mechanical abrasions, excessive heat or other damage. 3. Store geomembrane rolls on prepared surface (not on wooden pallets). 4. Stack geomembrane rolls no more than three rolls high. D. Handling on Site: 1. Use appropriate handling equipment to load, move, and deploy geomembrane rolls. Appropriate handling equipment includes cloth chokers and spreader bars for loading, and spreader and roll bars for deployment. Dragging panels on ground surface will not be permitted. 2. Do not fold geomembrane material; folded material will be rejected. 3. The GEOSYNTHETICS CONTRACTOR is responsible for off-loading, storage, and transporting material from storage area to installation site. The EARTHWORK CONTRACTOR shall unload the materials if the GEOSYNTHETICS CONTRACTOR is not onsite. 4. The GEOSYNTHETICS CONTRACTOR shall be responsible for damage to HDPE geomembrane during delivery, even if the rolls are unloaded by the EARTHWORK CONTRACTOR. The QA/QC CONSULTANT will determine damage. 1.8 WARRANTY (MANUFACTURER) A. Provide manufacturer's warranty for geomembrane material in compliance with provisions of the Conditions of the Contract. Provide a minimum 20-year pro rata warranty for the material against deterioration due to exposure to the elements, either exposed or buried. The warranty for material must cover costs of material replacement and installation; assuming the area is rendered in a clean, dry, unencumbered condition. In the event the area cannot be rendered as such, compensation for defective material will be provided to the OWNER on a pro rata basis for the estimated cost to the OWNER at that time of supplying and installing material to a clean, dry, and unencumbered condition by a third-party installer. B. Installation: Provide an installation warranty for geomembrane material in compliance with the conditions of the Contract. Provide a minimum of 2-year non-pro rata warranty for the installation against defects. PART 2 PRODUCTS