Laserfiche WebLink
Emergency Eye Wash and Shower Station <br /> Push/Pull the Lever to Activate the Unit - The dust covers will pop off on the eyewash unit and <br /> the flushing fluid will begin to flow out from the faucet heads. Once activated, the unit will stay <br /> on. <br /> Begin to Flush - Water should not be directly aimed onto the eyeball but aimed at the base of <br /> the nose. <br /> Hold Your Eyes Open with Your Fingers - Hold eyelids open using the thumb and index finger <br /> to help ensure that effective rinsing has occurred behind the eyelid. Always wash from the <br /> outside edges of the eyes to the chemicals back into the eyes or into an unaffected eye. <br /> Roll Your Eyes - Gently "roll" your eyes from left to right and up and down to be sure that the <br /> fluid is flushing all the areas of your eye. <br /> Flush for a Full 15 Minutes - Continue Flushing your eyes for a full 15 minutes. <br /> Take Out Your Contacts (If wearing) - If you have contact lenses in your eyes, you can gently <br /> take them out while you are flushing. Don't delay the flushing to take out your lenses but make <br /> sure that you take them out because they could trap the chemical in your eyes. <br /> Seek Help - After you have flushed, seek help from neared manager/supervisor for the next <br /> step. <br />